Hinged-door wardrobes in Moraira
Designed for the way you live

Hinged-door wardrobes in Moraira

We can assist you inEspañolEnglishDeutschРусский

Hinged-door wardrobes in Moraira. Each door swing is checked against the bed, bedside tables and room doors. Hinges must allow access to internal drawers.

  • The spaceA front-facing photo
  • DimensionsWidth, height, depth
  • StorageWhat it needs to hold
Designed for your space

Full access where the bedroom allows the doors to swing

A hinged door reveals the whole module, but its width and swing must work with the bed, bedside tables, sockets and circulation. The proposal continues to prioritise a calm visual link with the living space, ventilated storage and simple care.

01

Designed for the space

Dimensions and layout are checked against the room and your priorities.

02

Choices explained

We compare suitable materials and hardware before the specification is approved.

03

Scope in writing

The quotation identifies the furniture, fitting and any optional or separate work.

04

One project contact

Your contact coordinates questions about the proposal and the next steps.

Profile image for Ignacio Gallego
Ignacio GallegoYour contact in Moraira
Your project starts here

Connected decisions, from the first idea onwards.

I'm Ignacio Gallego. If several pieces need to work together, let's begin with the overall picture. Send me your rooms and references so we can organise priorities before choosing the individual details.

No obligation. Rough measurements are enough to get started.

Designed from the inside

Each door should correspond with the inside arrangement it opens

More doors do not guarantee better access. We establish width, hinges, handles and modules so the elevation remains proportionate and practical. In Moraira, it is tested against gated plots, open-plan living, strong daylight and periods when the property remains closed.

01

Swing clearance

We draw every door open against the bed, bedside table, wall and entrance door as part of the drawing rather than at the end. The practical consequence: the user can stand in front without becoming trapped.

02

Proportionate door width

With the recess verified, we relate door count to modules, height and elevation rhythm. Approval depends on one clear result: the doors do not become heavy or fragment the elevation without reason.

03

Sized hinges

Sequence matters. First, we select hinge quantity and type according to height, weight and opening. The second condition: each door retains alignment and adjustment through use.

04

Fully visible interior

We do not close this decision on an assumption. We align the door, division and pull-out accessories. The final check is straightforward: drawers, rails and baskets remain accessible without overlap.

Planning scenarios

Three bedrooms where door swing changes the design

A hinged door works well when the elevation, interior and space in front have been drawn together. The scenarios are adjusted for villas, detached houses, apartments and second homes.

Custom hinged-door wardrobes for shared wardrobe in Moraira
Scenario 01 · Sol Park

Six doors giving full view of each module

We divide the elevation around personal interiors and one shared zone. One condition still applies: each person opens their module without moving another door. The actual property conditions in Moraira take priority over a catalogue solution.

Starting point
The drawing records how we confirm the distance to the bed and both bedside tables. A later review leaves one clear criterion: every door has a clear swing.
Decision
A nominal dimension is not enough here. We assign one or two doors to each group of rails, drawers and shelves. After the review, the elevation explains the internal organisation.
Before manufacture
This is not about adding more modules. We test handles, simultaneous opening and access to lower drawers. Usefulness is tested in one way: two users can use the wardrobe without conflict. For a property around Cap Blanc, access and handling are reviewed before component sizes are fixed.
Custom hinged-door wardrobes for end beside a wall in Moraira
Scenario 02 · Cap Blanc

A final door that opens without striking the wall

Instead of assuming a standard answer, we allow separation, an opening restriction or a proportionate trim. The intended result can be stated plainly: the handle and edge do not mark the perpendicular wall. For a property around Cap Blanc, access and handling are reviewed before component sizes are fixed.

Starting point
Instead of assuming a standard answer, we measure the side wall, skirting, switch and handle projection. The intended result can be stated plainly: the conflict is known before component planning. The proposal must continue to prioritise a calm visual link with the living space, ventilated storage and simple care.
Decision
With the recess verified, we adjust the trim, hinge and maximum angle of the end door. Approval depends on one clear result: the module retains a comfortable opening.
Before manufacture
We begin with one practical check: we assess drawers and accessories against the available angle. It produces a specific result: the swing restriction does not create another internal obstruction.
Custom hinged-door wardrobes for tall door in Moraira
Scenario 03 · Sabatera

Continuous panels with correctly specified hinges

We calculate weight, stiffness, hinges and adjustment points by considering use and geometry together. Acceptance is based on this result: the vertical composition does not lose stability. In Moraira, this decision is also checked against gated plots, open-plan living, strong daylight and periods when the property remains closed.

Starting point
Before this part is approved, we measure height, level variation and allowance between door, floor and ceiling. The objective is clear: the panel can swing without rubbing.
Decision
The solution is tested in two stages. First, we choose substrate, thickness and hinge quantity for the intended finish. Then, weight and deflection remain controlled. The proposal must continue to prioritise a calm visual link with the living space, ventilated storage and simple care.
Before manufacture
We confirm transport and space for offering up the door during fitting before the drawing is closed. Once that decision is made, the component arrives, hangs and adjusts safely.
Before choosing

How a hinged wardrobe elevation changes

Width, height, handle and hinge produce different demands. The inside arrangement sets the most useful rhythm. The actual property in Moraira completes the choice.

ConfigurationUsually solvesCritical check
Two wide doors Frequent application: Short wardrobe with broad access Critical point: Weight and swing space
Four or six doors Starting point: Long wall with clear modules The survey must confirm: Rhythm, junctions and simultaneous opening
Full-height door Starting point: Continuous vertical elevation Do not close the design without reviewing: Stiffness, hinges and floor clearance
Separate top cupboard Primary role: Daily storage below, seasonal above The survey must confirm: Horizontal line and access
Applied handle Usually considered for: Direct opening and visible detail The survey must confirm: Projection, impact and ergonomics
Finger pull or push Need addressed: Quieter elevation The site survey tests: Grip, fingerprints and adjustment
Written scope

What the hinged wardrobe project includes

The proposal shows the elevation closed and open, allowing swing, access and layout to be approved before the order reaches the workshop.

01

Room survey

We survey the wardrobe, bed, bedside tables, doors, windows, sockets and route once dimensions have been checked. The direct consequence: each door swing starts from the complete room.

02

Elevation design

The solution is tested in two stages. First, we resolve quantity, width, height, joints, handles and horizontal lines. Then, the elevation responds to the inside arrangement and wall proportion. For a property around El Portet, access and handling are reviewed before component sizes are fixed.

03

Coordinated interior

The drawing records how we align modules, rails, drawers and accessories with each opening. A later review leaves one clear criterion: all contents are reached through the corresponding door.

04

Hinges and opening

We specify load, hinge quantity, closing, restriction and adjustment during design. The detail is resolved when the result is clear: the intended movement is documented.

05

Manufacture and finishes

We close substrate, thickness, lacquer, veneer, board, mirror and edges during design. The detail is resolved when the result is clear: the door retains flatness and durability.

06

Fitting and alignment

Before this part is approved, we hang, adjust gaps, check closing and review rubbing points. The objective is clear: the elevation is handed over level and functional.

Moving switches, correcting walls, decoration or removing the old wardrobe are separate items when applicable. Any additional work identified in Moraira is added only after it has been explained and priced.

A verifiable plan

Door swing is validated before the workshop slot

Door count, height, finish, hinges, interior and fitting space change cost and programme. In Moraira, we also confirm gated plots, open-plan living, strong daylight and periods when the property remains closed.

From enquiry to final adjustment

  1. 01
    Photos and priorities

    We review photographs, rough dimensions and what the wardrobe project needs to achieve, then explain what information is missing.

  2. 02
    Verified opening

    The space, opening, access and door movement are checked before the working configuration and elevation are approved.

  3. 03
    Production slot

    Drawings, finishes, hardware, commission detail and written price proposal are accepted ahead of production is booked.

  4. 04
    Fitting and review

    Delivery, protection, installation, adjustment and final review are coordinated in Moraira. The proposal must continue to prioritise a calm visual link with the living space, ventilated storage and simple care.

Factors included in the assessment

Quantity and format

The selected composition reflects its actual work. That is why we review wide doors, higher door counts, top cupboards and continuous panels.

Hinges and closing

The proposal becomes more coherent when we size hinges, soft closing, push catches, restrictors and accessories. The requirement remains unchanged: each mechanism relates to weight and frequency.

Finish and handles

Instead of assuming a standard answer, we contrast board, lacquer, veneer, mirror, finger pulls and applied handles. The intended result can be stated plainly: preparation, edging and machining appear in the scope.

Interior and fitting

During design, we include carcasses, equipment, access, hanging, adjustment and review. The drawing can progress once this result is clear: the elevation is assessed as part of the complete wardrobe. The proposal must continue to prioritise a calm visual link with the living space, ventilated storage and simple care.

Property and access · Moraira

Location gives context; the opening makes the decision

Projects may involve villas, detached houses, apartments and second homes. We do not assign one solution to an area: the construction, use and fitting route of each property are checked.

01

Pla del Mar and Paichi: reading the property

For custom hinged-door wardrobes, broad photographs and one rough dimension usually reveal what needs checking during the survey. The brief remains tied to the actual room.

02

Access and component sizes around Benimeit

Gated plots, open-plan living, strong daylight and periods when the property remains closed can change panel sizes, the delivery order and fitting time. We record those facts before manufacture.

03

Everyday use from Sol Park to Cap Blanc

The recommendation continues to prioritise a calm visual link with the living space, ventilated storage and simple care. Materials and accessories are compared by care and usefulness, not by a presumed local style.

Documented confidence

Identifiable contact and written project conditions

We publish how to contact us and when the team is available. Project-verified constraints in Moraira are recorded ahead of fabrication.

01

Project management

A project manager reviews the enquiry, requests any missing details and follows the work from measurement to final installation.

02

Published contact

MMV Studio publishes proyectos@mueblesmedidavalencia.es and a link to the applicable legal information on mueblesamedidamoraira.es.

03

Enquiry hours

Enquiry hours: Monday–Friday 09:00–13:00 / 14:00–20:00. Saturday 10:00–13:30 / 16:00–19:30.

04

Documented coverage

Coverage, duration, supplied elements, fitting conditions, maintenance and exclusions are set out in writing before manufacture.

05

Languages

We work in Spanish, English, German and Russian, by WhatsApp, e-mail or at the Moraira office by appointment.

Profile image for Ignacio Gallego
Ignacio GallegoYour contact in Moraira
The next step

Let's shape the next step.

Bring together the pieces or rooms you want to coordinate in one message. We'll review the decisions they share and what needs defining separately to move forward clearly.

Scope and terms are confirmed before you place an order.

Questions before the survey

Questions about custom hinged-door wardrobes in Moraira

Can a wide door be divided?+

Narrower leaves can be compared where they improve opening, weight or proportion. The interior must remain accessible.

What do I need for an initial enquiry?+

Send photographs, approximate dimensions and what you want the furniture to do. We will identify any details needed before a measured survey or quotation.

What is confirmed before manufacture?+

The design, dimensions, materials, hardware, price and installation scope need to be agreed. Changes are reviewed before they are put into production.

Your project starts here

Send the details you have

We will review your enquiry and contact you to clarify the scope and next steps. Sending this form does not place an order.

  1. 01 Initial reply and feasibility review
  2. 02 Suggested next step
  3. 03 A detailed quotation antes de fabricar
Ask on WhatsApp

No obligation. Approximate measurements are enough for an initial conversation.

Project enquiry

Plan your project

Answer only what you know. At the end you will have a summary ready to request a project estimate.

Step 1 of 6 · Project

What do you want to design?

Choose the closest option. You can add details at the end.

Project type
Step 1 of 6